Tutorial News Comments FAQ Related Articles

How to install and create an extension in FusionPBX

{{postValue.id}}

To Install And Create An Extension In FusionPBX

Introduction:

FusionPBX is a free SWITCH-based multi-tenant PBX that allows a robust set of features for business phone systems. Using Signal Wire services with FusionPBX permits you to leverage our high call quality and low rates.

Installation Procedure:

Step 1: check the OS version by using the below commands

root@ubuntu: ~# lsb_release -a
No LSB modules are available.
Distributor ID:	ubuntu
Description:	ubuntu 20.04.4 LTS
Release:	20.04
Codename:	focal

Step 2: Next download and install the Fusionpbx by using the below command

root@ubuntu: ~# wget -O - https://raw.githubusercontent.com/fusionpbx/fusionpbx-install.sh/master/debian/pre-install.sh | sh;

root@ubuntu: ~# cd /usr/src/fusionpbx-install.sh/debian && ./install.sh

Step 3: After install the fusionpbx, copy the username and password as shown in the below image snap 1

Step 4: Next go to the browser and browse the Ip address and login to login fusionpbx as shown in the below image snap 2

snap 3

Step 5: Go to extensions create Two new extensions (1050 and 1051) as shown in the below image snap 4

snap 5

snap 6

Step 6: Next, check the extension number by login the two extension number as shown in the below image snap 7

snap 8

Step 7: To connect the call 1050 to destination extension number 1051. The call has been received from 1050 extension number as shown in the below image snap 9

Step 8: Again, call from 1051 to 1050 extension. Call has been received.so, two extensions working properly. snap 10

Conclusion:

We have reached the end of this article. In this guide, we have walked you through the steps required to install and create extensions from fusionpbx. Your feedback is much welcome.

Tags:
Author: 

Comments ( 0 )

No comments available

Frequently asked questions ( 5 )

Q

What is FusionPBX?

A

FusionPBX can be used as a highly available single or domain-based multi-tenant PBX, carrier-grade switch, call center server, fax server, VoIP server, voicemail server, conference server, voice application server, appliance framework, and more.

Q

What is the difference between FreeSWITCH and FusionPBX?

A

FreeSWITCH is an open-source softswitch that's been around for over a decade. The lead designer is Anthony Minessale, who originally worked on the Asterisk project. FusionPBX is a GUI front end for FreeSWITCH that performs many of the same functions that FreePBX® performs for Asterisk.

Q

What is the difference between Fusion and FreePBX?

A

FusionPBX has Extra Features Included.FusionPBX includes those by default. FreePBX also has high availability, but it's also an extra cost and requires the backup system to be in the same building as the primary. FusionPBX's failover doesn't have to be in the same building, city, or even country.

Q

What is the default Web port for FreePBX?

A

The default installation of FreePBX is configured to use UDP port 5060 as the SIP signaling port and UDP ports 10000-20000 as the RTP Media ports.

Q

Is Fusion PBX free?

A

FusionPBX is a free and open-source graphical user interface for FreeSWITCH.

Back To Top!