How to install Fping ICMP Program on RHEL and CentOS

To install Fping ICMP Program on RHEL and CentOS

In this article we will discuss about how to install Fping ICMP Program on RHEL and CentOS. Fping uses ICMP (Internet Control Message Protocol). Fping command is used to ping multiple IP address. It is not available by default in the operating system, we need to install the packages to use the Fping command.

To download Fping RPM Package

It can be downloaded using wget command.
For RHEL/CentOS 6/5/4 32-Bit OS

## For RHEL/CentOS 6.3-6.0 32-Bit OS ##
# wget http://pkgs.repoforge.org/fping/fping-3.1-1.el6.rf.i686.rpm

## For RHEL/CentOS 5 32-Bit OS ##
# wget http://pkgs.repoforge.org/fping/fping-3.1-1.el5.rf.i386.rpm

## For RHEL/CentOS 4 32-Bit OS ##
# wget http://pkgs.repoforge.org/fping/fping-3.1-1.el4.rf.i386.rpm
For RHEL/CentOS 6/5/4 64-Bit OS

## For RHEL/CentOS 6.3-6.0 64-Bit OS ##
# wget http://pkgs.repoforge.org/fping/fping-3.1-1.el6.rf.x86_64.rpm

## For RHEL/CentOS 5 64-Bit OS ##
# wget http://pkgs.repoforge.org/fping/fping-3.1-1.el5.rf.x86_64.rpm

## For RHEL/CentOS 4 64-Bit OS ##
# wget http://pkgs.repoforge.org/fping/fping-3.1-1.el4.rf.x86_64.rpm

To install Fping RPM Package

The rpm command is used to download the Fping rpm package for your Linux distribution.

For RHEL/CentOS 6/5/4 32-Bit OS

## For RHEL/CentOS 6.3-6.0 32-Bit OS ##
# rpm -ivh http://pkgs.repoforge.org/fping/fping-3.1-1.el6.rf.i686.rpm

## For RHEL/CentOS 5 32-Bit OS ##
# rpm -ivh http://pkgs.repoforge.org/fping/fping-3.1-1.el5.rf.i386.rpm

## For RHEL/CentOS 4 32-Bit OS ##
# rpm -ivh http://pkgs.repoforge.org/fping/fping-3.1-1.el4.rf.i386.rpm
For RHEL/CentOS 6/5/4 64-Bit OS

## For RHEL/CentOS 6.3-6.0 64-Bit OS ##
# rpm -ivh http://pkgs.repoforge.org/fping/fping-3.1-1.el6.rf.x86_64.rpm

## For RHEL/CentOS 5 64-Bit OS ##
# rpm -ivh http://pkgs.repoforge.org/fping/fping-3.1-1.el5.rf.x86_64.rpm

## For RHEL/CentOS 4 64-Bit OS ##
# rpm -ivh http://pkgs.repoforge.org/fping/fping-3.1-1.el4.rf.x86_64.rpm

To Fping multiple IP Address

Run the following command to Fping multiple IP Address.

# fping 50.116.66.139 173.194.35.35 98.139.183.24

50.116.66.139 is alive
173.194.35.35 is alive
98.139.183.24 is alive

To Fping Range of IP address

Run the following command to Fping Range of IP address.

# fping -s -g 192.168.0.1 192.168.0.9

192.168.0.1 is alive
192.168.0.2 is alive
ICMP Host Unreachable from 192.168.0.2 for ICMP Echo sent to 192.168.0.3
ICMP Host Unreachable from 192.168.0.2 for ICMP Echo sent to 192.168.0.3
ICMP Host Unreachable from 192.168.0.2 for ICMP Echo sent to 192.168.0.3
ICMP Host Unreachable from 192.168.0.2 for ICMP Echo sent to 192.168.0.4
192.168.0.3 is unreachable
192.168.0.4 is unreachable

8      9 targets
       2 alive
       2 unreachable
       0 unknown addresses

       4 timeouts (waiting for response)
       9 ICMP Echos sent
       2 ICMP Echo Replies received
      2 other ICMP received

 0.10 ms (min round trip time)
 0.21 ms (avg round trip time)
 0.32 ms (max round trip time)
        4.295 sec (elapsed real time)

To Fping Complete Network with Different Options

This command will ping complete network and repeat once (-r 1)

# fping -g -r 1 192.168.0.0/24
To read the List of Targets From a File

# fping <  fping.txt

173.194.35.35 is alive
98.139.183.24 is alive

To show Version of Fping

# fping -v
fping: Version 3.1
fping: comments to david@schweikert.ch