☰
✕
✕

How to install Freenas server v11.3

To Install FreeNAS 11.3

Introduction:

FreeNAS is an open source storage operating system that allows the sharing of storage over a network. It was created in 2005 and is based on the open source FreeBSD OS. FreeNAS software can be downloaded at no cost from freenas.org.and runs on most x86-64 commodity hardware.

Installation Steps:

Step 1: Download the iso file from the official website. and make it bootable.

Step 2: Press Enter to start the installation

Step 3: choose Install and press Enter

Step 4: press yes to continue anyway

Step 5: choose installation disk, use space key to select a disk

Step 6: select yes to format the disk

Step 7: Enter root password

Step 8: choose Bios option as per your motherboard configuration

Step 9: choose Reboot

Step 10: Don’t press anything now, it will automatically reboot

Step 11: configure the network interface

Step 12: Enter IP into the browser and login as a root

Conclusion:

We have reached the end of this article. In this guide, we have walked you through the steps required to Install FreeNAS 11.3. Your feedback is much welcome.

Tag : FreeNAS Server
FAQ
Q
What is the abbrevation of NAS?
A
Network Attached System.
Q
What is the required ram for FreeNAS?
A
4 Gb is the minimum required size
Q
Is FreeNAS support smb protocol?
A
yes it supports smb.
Q
How many interfaces does FreeNAS have?
A
FreeNAS system has one network interface, em0.
Q
What is the architecture FreeNAS support?
A
It runs on most x86-64 commodity hardware.